[Date Prev][Date Next] [Chronological] [Thread] [Top]

(erielack) Croxton Piggyback Operations (was Pics)



Chris and List,

I don't think this was discussed in any depth in the past year anyway. I'm
sure Bill Sheppard will have some comments and corrections, since he worked
at the facility; his "Tidewater Terminals" book (available through ELHS) has
a schematic of Cx and I highly recommend it. Until 1969 it was strictly a
circus-loading facility located on the east side of the yard; it consisted
of 8 ramp tracks, each with a capacity of 10 long flats, with the ramps
located on the north (tt west) end. In 1969 it began to be mechanized with
the installation of an adjacant long concrete pad as follows: 7 tracks of
westbound classification yard "A" (A17-A23) were removed, A16 and A24 were
extended east and the pad placed between. This also used one of the ramp
tracks, leaving 7. A16 had a capacity of 43 long flats, A24 somewhat less.
The facility thus occupied most of the north (east) side of the yard between
the PC and NYS&W bridges. A P-70 Piggypacker (used a "clamshell" lift
device) was acquired initially, later joined by two P-90's (larger machines
with folding grapple arms) as the UPS traffic developed. The pad area was
subsequently expanded at least once, reducing the ramp tracks to 5. However
the ramps continued to be used right to the end, for tank trailers, packer
failures and traffic peaks; it was more cramped than the Chicago facility
(which only retained two ramp tracks) and so had a greater need for them.

About the photo: I'm guessing it was taken at KW facing roughly north, and
the loaded flats are on A16, with the pad behind them. The flats to the
right are in "D" yard, and the ramp tracks are somewhere behind the
switcher. I gather this is 1970 and there is just the P-70, so the ramps are
still in heavy use.

Paul B

3.) Lastly, in this picture of #363, at what I presume is Croxton, you see
loaded pig flats on the left and if you scroll to the right, you see
empties.  In this photo, there are tracks in front of the flats, which makes
me ask, how were these loaded at this time??  By piggypacker or crane, which
would imply that there are no tracks behind the flats to allow the machines
to move about?  Or - circus style with the trailers backed on?  I would be
curious to find out more about pig ops in Croxton at this time.  I realize
that this may have been covered previously on the list, so if it has been,
pls. just refer me to the time frame over which it was discussed.
http://www.railfan.net/railpix/submit/subphoto.cgi?rondukarm/dsl_363_croxton_ew_c70.jpg

Thanks in advance for any comments.

Regards,

Chris Thurner





	The Erie Lackawanna Mailing List
	Sponsored by the ELH&TS
	http://www.elhts.org

------------------------------