> I have a HO Scale EL/NJDOT U34CH and want to model the Red > Nose Light. Has anybody modeled this? If so how and what > did you use. > > Thanks, > > Matt F. Matt, I will be working on an article for "From The Workbench" on how to model an EL U34CH. There really is no correct part for the red nose light, but I cut a square hole out of the nose, then built a styrene "L" shape (inverted) to fit into the hole. I cut a thin slice of the appropriate diameter styrene rod for the chromed ring around the light, then countersink a hole for an MV Products lens. Of course, there's a lot to be corrected on those U34CH's, including correcting the sideframes, adding angled HEP connectors, fixing the horn, removing the NBW castings on the nose, removing the large intakes behind the cab, etc. etc. I stripped all my U34CHs since I'll be repainting them with the correct lettering, too (Prime Mover Decals set PMD-010 - nothing like a little self-promotion :) - Paul The Erie Lackawanna Mailing List http://EL-List.railfan.net/ To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html ------------------------------
This HTML page is © 2000-2009 Blue Moon Online System and The Railfan Network
This page and the data contained therein may not be reproduced
for any form of commercial use without the explicit permission
of J. Henry Priebe Jr. or his duly authorized agent.