Re: (erielack) Erie modelling info

[andrisd_@_aol.com]

Thanks Jim, I will post any photos I only plan to re-decal a CNJ 
version that is currently available.

Andy Cole


- -----Original Message-----
From: James Harr <bnchmark_@_embarqmail.com>
To: erielack_@_lists.railfan.net
Sent: Wed, 3 Sep 2008 9:25 am
Subject: Re: (erielack) Erie modelling info



Hi Andy;

This sounds like a great project! While I can't say for sure about the
lettering/paint that K-Line uses, you very likely will be able to 
remove, if
you really feel you need to. Try the 90% rubbing alcohol, not the 70% 
(which
is just diluted with water). Barring that, you can always try to 
wet-sand
away any lettering that you can get to with small pieces or strips of
600-grit wet-or-dry sandpaper. I find that, once you remove what you 
can,
re-coat it with black (after applying any details, etc) then decaling 
and
weathering, you'd never know the lettering wasn't stripped off.

Oh - and please show us your efforts! From the Workbench would VERY much
like to feature some O material, but few O-scalers share their work.

Jim Harr




Date: Mon, 01 Sep 2008 08:57:49 -0400
From: andrisd_@_aol.com
Subject: (erielack) Erie modelling info

Good morning, has anyone that is modelling O scale taken one of the 
K-Line
boxcab locos and relettered it for the Erie version?
Before I buy one, I was wondering if the factory lettering is removable 
with
alcohol or something just as easy.


Thanks

Andy Cole


The Erie Lackawanna Mailing List
http://EL-List.railfan.net/
To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html


	The Erie Lackawanna Mailing List
	http://EL-List.railfan.net/
	To Unsubscribe: http://Lists.Railfan.net/erielackunsub.html

------------------------------